Tricky Circuit

Power and component ratings

A resistor has a heat budget

Power is the rate of energy transfer. P denotes power; a watt (W) is one joule per second. A resistor converts electrical energy into heat. Its power rating is an operating limit under specified conditions. A joule is a unit of energy; a milliwatt (mW) is one thousandth of a watt.

Open interactive experiment

EXPERIMENT BENCH

Change the circuit settings, predict the readings, then check a challenge. These are learning models, with the assumptions explained in each lesson.

Sign in to save progress. Guest progress stays on this device.

Open laboratory in a full window

Why it works

Ideal steady voltage and resistance. Temperature and cooling are not simulated; the rating is a comparison, not a prediction of failure.

P = V²/R and I = V/R. Doubling voltage at fixed resistance makes four times the power. Rating use = 100 × P/rating.

Difficulty
  1. Build · Build it

    Power on at 5 V, 1000 Ω and a 0.25 W rating. Read 25 mW.

    Need a hint?

    5 V; 1000 Ω; 0.25 W → 25 mW

  2. Explore · Change one thing

    At 9 V and a 0.25 W rating, keep power at or below 125 mW while current is at least 10 mA.

    Need a hint?

    9 V; 800 Ω; 0.25 W → 101.25 mW; 11.25 mA

  3. Solve it · Solve the challenge

    At 12 V and a 0.25 W rating, obtain 170–190 mW with current no greater than 20 mA.

    Need a hint?

    12 V; 800 Ω; 0.25 W → 180 mW; 15 mA

Extra reading and circuit recipes

A resistor has a heat budget

A useful pattern

At fixed voltage, twice the resistance means half the current and half the power.

Beyond this model

A real rating depends on ambient temperature, mounting and the manufacturer’s derating curve.

A useful trap to avoid

A 0.25 W rating does not mean the resistor always consumes 0.25 W.

Voltage doubles while resistance stays fixed. Power…

  1. doubles
  2. quadruples
  3. halves
Read more

Voltage is squared in P = V²/R; a factor of two becomes a factor of four.

Vishay

Temu affiliate offers

Find your next electronics project

Explore these do-it-yourself project kits. Check the selected option, included parts and instructions on each offer.

Tricky Circuit may earn a commission if you buy through these Temu affiliate links. These are product ideas; they have not been bench-tested by Tricky Circuit and are not verified lesson parts lists.

Supplier photo of an assembled infinity mirror light cube illuminated on a dark background.

Supplier product photo

Build an infinity light cube

Listing specifies 5-volt direct current. Soldering required; battery and glue not included.

View kit on Temu

Supplier photo of a breadboard, jumper wires and assorted electronic components in a plastic storage case.

Supplier product photo

Try breadboard experiments

Breadboard, wires and assorted parts. Arduino controller board not included.

View kit on Temu

Supplier photo of an assembled blue surface-mount soldering practice board with a circular ring of small lights.

Supplier product photo

Solder a chasing-light board

Surface-mount soldering practice. Battery and battery holder not included.

View kit on Temu