SN74HC165: Freeze Eight Inputs Before Reading Them Slowly
Capture eight button states with a 3.3 V SN74HC165N, read H before the first clock, and expose the extra-shift trap on CLK INH.
Unravel the Mystery of Electronics

Soldering required. Check the supplied parts and board revision.

Listing specifies 5-volt direct current. Soldering required; battery and glue not included.

Breadboard, wires and assorted parts. Arduino controller board not included.

Surface-mount soldering practice. Battery and battery holder not included.

Clock-and-case project kit. Soldering required; check included parts and power requirements.

Soldering and assembly required. Check battery and track requirements before buying.
Tricky Circuit may earn a commission through these links. Product ideas have not been bench-tested by Tricky Circuit and are not verified lesson parts lists.
Capture eight button states with a 3.3 V SN74HC165N, read H before the first clock, and expose the extra-shift trap on CLK INH.
Build a Pico SN74HC595 panel that holds its old pattern while new bits shift in. Compare latch errors, shift clear and output blanking with complete code.
The SN74HC595 is an 8-bit serial-in, parallel-out shift register with a storage register and tri-state outputs. It is widely used for expanding the number of …
Explore these do-it-yourself project kits. Check the selected option, included parts and instructions on each offer.
Tricky Circuit may earn a commission if you buy through these Temu affiliate links. These are product ideas; they have not been bench-tested by Tricky Circuit and are not verified lesson parts lists.

Supplier product photo
Soldering required. Check the supplied parts and board revision.

Supplier product photo
Listing specifies 5-volt direct current. Soldering required; battery and glue not included.

Supplier product photo
Breadboard, wires and assorted parts. Arduino controller board not included.

Supplier product photo
Surface-mount soldering practice. Battery and battery holder not included.

Supplier product photo
Clock-and-case project kit. Soldering required; check included parts and power requirements.

Supplier product photo
Soldering and assembly required. Check battery and track requirements before buying.