Calibrate a KY-023 Joystick on Pico: Center, Endpoints and Dead Zone
Measure a joystick’s real center and travel. Wire a Joy-IT KY-023 to Pico at 3.3 V, add a dead zone and count clean button presses with complete Python code.
Unravel the Mystery of Electronics

Soldering required. Check the supplied parts and board revision.

Listing specifies 5-volt direct current. Soldering required; battery and glue not included.

Breadboard, wires and assorted parts. Arduino controller board not included.

Surface-mount soldering practice. Battery and battery holder not included.

Clock-and-case project kit. Soldering required; check included parts and power requirements.

Soldering and assembly required. Check battery and track requirements before buying.
Tricky Circuit may earn a commission through these links. Product ideas have not been bench-tested by Tricky Circuit and are not verified lesson parts lists.
A joystick module is an electronic component that allows users to input directional movements into a system. It typically features a stick that can move in multiple directions and sometimes includes one or more pushbuttons that can be activated by pressing down on the stick. Joystick modules are commonly used in robotics, gaming controls, and various interactive devices to provide intuitive control over movement. They interface with microcontrollers or computers and can be analog, offering smooth, precise control, or digital, providing simple directional inputs. This makes them versatile for designing user interfaces where manual input and navigation are required.
Measure a joystick’s real center and travel. Wire a Joy-IT KY-023 to Pico at 3.3 V, add a dead zone and count clean button presses with complete Python code.
The KY-023 joystick module is a versatile input device that works with Arduino, Raspberry Pi, and other microcontrollers. It provides analog motion control and a built-in button, making it perfect for robotics, games, and interactive projects.
🔹 How It Will Work 🔹 Components Needed ✅ Arduino (Uno/Nano/etc.)✅ SG90 Servo Motor✅ 28BYJ-48 Stepper Motor + ULN2003 Driver✅ Joystick Module (KY-023 or similar)✅ …
🔹 Components Needed ✅ Arduino (Uno/Nano/etc.)✅ SG90 Servo Motor✅ Joystick Module (XY type, like KY-023)✅ Jumper Wires & Breadboard 🔹 Understanding the Joystick The joystick …
Explore these do-it-yourself project kits. Check the selected option, included parts and instructions on each offer.
Tricky Circuit may earn a commission if you buy through these Temu affiliate links. These are product ideas; they have not been bench-tested by Tricky Circuit and are not verified lesson parts lists.

Supplier product photo
Soldering required. Check the supplied parts and board revision.

Supplier product photo
Listing specifies 5-volt direct current. Soldering required; battery and glue not included.

Supplier product photo
Breadboard, wires and assorted parts. Arduino controller board not included.

Supplier product photo
Surface-mount soldering practice. Battery and battery holder not included.

Supplier product photo
Clock-and-case project kit. Soldering required; check included parts and power requirements.

Supplier product photo
Soldering and assembly required. Check battery and track requirements before buying.