Measure Mutual Inductance by Reversing One Choke Winding
Measure a Coilcraft choke in four connections. Use the series difference to estimate mutual inductance and the sum to check the readings.
Unravel the Mystery of Electronics

Listing specifies 5-volt direct current. Soldering required; battery and glue not included.

Breadboard, wires and assorted parts. Arduino controller board not included.

Surface-mount soldering practice. Battery and battery holder not included.

Soldering and assembly required. Check battery and track requirements before buying.
Tricky Circuit may earn a commission through these links. Product ideas have not been bench-tested by Tricky Circuit and are not verified lesson parts lists.
Measure a Coilcraft choke in four connections. Use the series difference to estimate mutual inductance and the sum to check the readings.
Sweep a Bourns 1 mH choke before, during and after adding 22 pF. Use a repeat sweep and the actual frequency grid to check the resonance shift.
Compare two air-core coils at 35 mm, 60 mm and 90° with one shared scope return. Use a current shunt, two controls and a complete Python analyzer.
Sweep a series RLC circuit with two scope channels. Compare its measured peak and half-power bandwidth before and after adding 33 ohms.
Pulse a Coilcraft LPS4018-333MRC through a current limiter and compare its incremental inductance in two measured current bands.
Inductors are used in a wide range of electrical and electronic systems. Here are more practical examples of how they are applied in real-world circuits: …
An inductor is a passive electrical component that stores energy in a magnetic field when electric current flows through it. It consists of a coil …
Explore these do-it-yourself project kits. Check the selected option, included parts and instructions on each offer.
Tricky Circuit may earn a commission if you buy through these Temu affiliate links. These are product ideas; they have not been bench-tested by Tricky Circuit and are not verified lesson parts lists.

Supplier product photo
Listing specifies 5-volt direct current. Soldering required; battery and glue not included.

Supplier product photo
Breadboard, wires and assorted parts. Arduino controller board not included.

Supplier product photo
Surface-mount soldering practice. Battery and battery holder not included.

Supplier product photo
Soldering and assembly required. Check battery and track requirements before buying.